Laser Non-Contact Infrared Industrial Thermometer

1.Laser Non-Contact Infrared Industrial Thermometer 2.Data storage 3.LCD backlight 4.Laser target pointer 5.CE,FDA,ROHS

  Laser Non-Contact Infrared Industrial Thermometer

Measurement range : -50°C to 1150°C(-58°F to 2102°F) Accuracy : 0~1150°C(32-2102°F):±1.5°C(2.7°F)  or 1.5% ,-50~0 °C (-58~32 °F ): ± 3 °C ( ± 5 °F )Whichever is greater Resolution : 0.1°C or 0.1°F Distance to spot size : 20:1 Repeatability : 1% of reading or 1°C Operating Humidity : 10~95%RH non-condensing up to 30°C(86°F) Spectral response :  (8-14)um Response Time : 500msEmissivity :0.95(Pre-Set) Power :9V Alkaline or NiCd battery

Typical battery life(Alkaline):Non-laser mode; 22 hrs ,Laser models:12hrs

Storage Temperature: -20~60°C(-4~140°F)

Size :141*60*200mm 

Weight :270g

A:Press SET key to save setup

B:Date storage :when selected STO ,lock &data&1 indicator will show when press SET key,After temperature read out press STO/CAL key to store.then 2 memory unit will be shown,there 12 groups memory unit available,To recall the stored date in normal measuring mode by pressing STO/CAL key remove all data by pressing STO/CAL keys for 3 seconds

C:Laser/back light button.When backlight is on,any operations will remain back light for 10 seconds

LCD indicate on/off status

D/F:High temperature alarm:when selected HAL Press D/F to set high temperature alarn trigger and confirmed by pressing SET key.Low temperature alarm:when selected LAL,press D/F to set low termperture alarm trigger and confirmed by pressing SET key

E:Key functions:press MODE key ,LCD subdisplay blinks MAX-MIN-AVG-HAL-LAL-STO-EMS segment(only main display means normal measuring mode)press SET enter

G:Clesius/Fahrenheit switch :Please open battery and push the slide switch for convertsion

H:Trigger:when turn on LCD distplay Verxx software version for 1 sec,And turn to display reading with SCAN icon,Release the trigger ,dispaly reading with HOLD icon,Buit in auto power off in 7 sec.

1.Infrared thermometer          1PCS

2.Manual English         1PCS

3.Battery 9V           1PCS

4.Gift box           1PCS

Maintenence

1.Lens Cleaning

Blow off loose particles using clean compressed air,Gently brush remaining debris away with a moist cotton swab,The swab maybe moistened with water

2.Case cleaning

Clean the case with a damp sponge/cloth and mild soap

Note:

1)Do not use solvent to clean plastic lens

2)Do not submerge the unit in water

Laser Non-Contact Infrared Industrial Thermometer