Shenzhen Fuzhe Technology Co., Ltd.
Main products:Laser Module,Laser Level,Laser Distance Meter,Laser Stage Light,Infrared Thermometry
Products
Contact Us
  • Contact Person : Mr. Lee Tim
  • Company Name : Shenzhen Fuzhe Technology Co., Ltd.
  • Tel : 86-755-84528255
  • Fax : 86-755-84528390
  • Address : Guangdong,Shenzhen,Email:mandy-lees at hotmail.com,2nd Building,Yuanzheng Industrial Park,Bantian,Longgang District,Shenzhen,Guangdong,China
  • Country/Region : China
  • Zip : 518129

non contact Infrared Thermometer laser

non contact Infrared Thermometer laser
Product Detailed
1.non contact Infrared Thermometer laser 2.Data storage 3.LCD backlight 4.Laser target pointer 5.CE,FDA,ROHS

non contact Infrared Thermometer laser

Measurement range :  -18 °C~ 1150°C (-0°F~2102°F)  Accuracy :0-1150°C(32-2102°F):±1.5°C(±2.7°F or ±1.5% ,-18~0°C(0~32°F)±3°C(±5°F) Whichever is greater Resolution : 0.1°C or 0.1°F Distance to spot size : 50:1 Repeatability : 1% of reading or 1°C Operating Humidity : 10~95%RH non-condensing up to 30°C(86°F) Spectral response :  (8-14)um Response Time : 500msEmissivity :0.95(Pre-Set) Power :9V Alkaline or NiCd battery

Typical battery life(Alkaline):Non-laser mode; 22 hrs ,Laser models:12hrs

Storage Temperature: -20~60°C(-4~140°F)

Size :141*60*200mm 

Weight :270g

A:Press SET key to save setup

B:Date storage :when selected STO ,lock &data&1 indicator will show when press SET key,After temperature read out press STO/CAL key to store.then 2 memory unit will be shown,there 12 groups memory unit available,To recall the stored date in normal measuring mode by pressing STO/CAL key remove all data by pressing STO/CAL keys for 3 seconds

C:Laser/back light button.When backlight is on,any operations will remain back light for 10 seconds

LCD indicate on/off status

D/F:High temperature alarm:when selected HAL Press D/F to set high temperature alarn trigger and confirmed by pressing SET key.Low temperature alarm:when selected LAL,press D/F to set low termperture alarm trigger and confirmed by pressing SET key

E:Key functions:press MODE key ,LCD subdisplay blinks MAX-MIN-AVG-HAL-LAL-STO-EMS segment(only main display means normal measuring mode)press SET enter

G:Clesius/Fahrenheit switch :Please open battery and push the slide switch for convertsion

H:Trigger:when turn on LCD distplay Verxx software version for 1 sec,And turn to display reading with SCAN icon,Release the trigger ,dispaly reading with HOLD icon,Buit in auto power off in 7 sec.

1.Infrared thermometer          1PCS

2.Manual English         1PCS

3.Battery 9V           1PCS

4.Gift box           1PCS

Maintenence

1.Lens Cleaning

Blow off loose particles using clean compressed air,Gently brush remaining debris away with a moist cotton swab,The swab maybe moistened with water

2.Case cleaning

Clean the case with a damp sponge/cloth and mild soap

Note:

1)Do not use solvent to clean plastic lens

2)Do not submerge the unit in water

non contact Infrared Thermometer laser



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.